Need Help?
BT Integra-Pack Tester

TME BT Integra-Pack Package Test System

The BT Integra Pack is essential for Package Burst Testing, Creep, Creep-to-Failure and Leak Integrity Tests

This completely integrated process control tool offers accurate package test results which can be transmitted directly to your quality control department. Its objective is to validate a package ensuring that it matches the high standard of the product enclosed.

The BT Integra-Pack© is a high-resolution (0.001 psig), bench-top test instrument with a small footprint and user-friendly ease of operation. Electronic pressure and flow controls provide precise and repeatable test conditions while automatic and high flow output allow testing of large porous packages. Applications cover a range of flexible or rigid, porous and non-porous, open or sealed packages.

This intelligent instrument can test any package in automatic mode without the need to input test parameters. However, its sophisticated nature is combined with a manual mode that lets the user input parameters such as ramp rate control and back pressure drop sensitivity. This allows testing of special configurations or types of packages or perform specific research and data-gathering activities.


  • Industry : Food & Pharmaceutical, Packaging
  • Measuring Range : BT-IP-50: 5 InH2O to 50 PSI (12.5 to 3450 mbar), BT-IP-100: 0.5 PSI to 100 PSI (34 to 6895 mbar)
  • Measuring Resolution : BURST: 0.01 psi (0.3 InH2O) or 0.7 mbar, LEAK (Pressure Decay): 0.001 psi (0.03 InH2O) or 0.07 mbar)
  • Units of Measure : PSI / InH2O / mbar / kPa / InHg
  • Power Supply Voltage : 100 - 230 VAC 50/50 Hz, 45w max
  • Air Supply Pressure : 60 - 120 psig (4.0 - 8.0 bar)
  • Instrument Quality Air Controls : Electronic Pressure Control, Illuminated Start/Stop Switch, Key Lock, Power ON/OFF Switch
  • Test Modes : Burst, Creep, Creep-to-Failure, Pressure Decay Leak
  • Dimensions : 10" x 13" x 7" (254 x 330 x 180 mm)
  • Weight : 12.5 lbs (5.6 kg)
  • Complies with : ASTM standard F2714-08F-1140, F-2054, F-2095


  • Complies with standards for all commonly-used Seal Strength and Package Integrity tests (Burst, Creep, Creep-to-Failure, and Leak Integrity)
  • Automatic Burst Test Mode
  • Manual Burst Test Mode
  • High Performance
  • Advanced, user-defined smart interface compatible with USB keyboards, mice, bar code readers
  • Low Power Stand-by Mode for energy conservation
  • Graphical test plot display for leak, burst and creep tests
  • High Resolution Color LCD Display with Touchscreen
  • Standard and Metric units
  • Test data exporting to PC using Flash Drive


  • Tilt Stand
  • Internal SD Card for Expanded Storage (512 MB)
  • TS-02 Closed Package Test Fixture
  • Test Probes (various sizes available)
  • TS-01 Open Package Fixture, 12” Jaw Width
  • TS-04 Open Package Fixture, 24” Jaw Width
  • Restraining Plate Fixtures
  • LA-05 Filter Drying Assembly
  • USB Printer
  • Digital Flow Valves, Leak Orifices
  • Custom Fixtures and Adapters for Your Application

Besoin d'aide? Prenez contact aujourd'hui.